本色视频

This upgrade is part of the Technical Improvement Program (TIP); it replaces the mechanical gear boxes for the inside and outside elevator with servo drives.

The load on the mechanical drive train is reduced by removing the elevator axes. The new servo drives are electrically geared to the main drive. Homing procedure on the HMI allows proper startup after the machine powered first time. Elevators can be moved up and down independently of the rest machine, for setup and tuning. Parameters behind the password screen setup the start point of the electrical cam profile, thus eliminating the mechanical timing setup.

This upgrade comes with two new drives and motors and required expansion module to add two servo axes to the controller. Each axis uses the same type drive and motor. The existing elevator plates can be used.